Regarding the battery maintenance of electric motorcycle, first of all, we should pay attention to the electric door lock should be closed when the electric motorcycle is charged, and the battery can not be charged upside down. When charging, we should try to fill it once.  Charging process if smell odor or the battery temperature is too high, should immediately stop charging and send to the technical department for maintenance.  When you remove the battery and charge it, do not touch the electrode ends with a wet hand or metal such as a key to avoid burns.  

If the electric motorcycle is not used for a long time, we should pay attention to every month should be charged once, to the battery full of electricity after storage, avoid by all means can not be stored in the state of loss of power;  In order to protect the battery, the user can charge with use, but can not use the recovery voltage driving, to prevent serious power loss, when the battery is out of power, should turn off the power to ride.  

Electric motorcycles must be charged with a matching charger.  Because the battery formula and process are different, the technical requirements for the charger are not the same, which kind of charger charge what brand of battery can be full, are not the same, so do not mix the charger.  

When the electric motorcycle is charging, the charging indicator light shows that when the battery is full, do not stop charging immediately. It should be charged for 2-3 hours.  After the car in use, we should pay attention to more maintenance, if it rains, can not let the water flood the hub center;  When you get off, you should also pay attention to the timely closing of the switch, usually the tires will be sufficient gas;  In the case of uphill, wind and other heavy load, with foot power;  In case of failure, send to designated special maintenance department for repair in time.  

Electric motorcycle in the charging time should also pay attention to lubrication, according to the use of the front axle, rear axle, axle, flywheel, front fork, shock absorber rotation fulcrum and other components every six months to 1 years for a scrub and lubrication (recommended use molybdenum disulfide grease).  For the electric motorcycle in the electric wheel hub within the transmission parts have been coated with special lubricating oil, users do not have to scrub lubrication.